KYOSHO MINI-Z RWD MR-04 readyset McLaren P1 GTR Pebble Beach Show 2015 32375SO ศูนย์ไทย

KYOSHO MINI-Z RWD MR-04 readyset McLaren P1 GTR Pebble Beach Show 2015 32375SO ศูนย์ไทย

Description

Latest high-performance MR-04 chassis

E※The separately sold LED light unit set (No.MZW429R) cannot be installed on the McLaren P1 GTR.

 

 

The P1 GTR is a track-focused version of McLaren’s P1 super sports car. The model, painted in McLaren’s signature orange and silver corporate colors, was unveiled at an automotive event in Pebble Beach, California.

 

 

 

New front knuckles with integrated kingpins reduce scrub by 1.5mm on each side compared to the MR-03, realizing sharper and more linear control. The change to 3mm inner diameter ball bearings also reduces rotational resistance.

 

Front suspension dynamically aligns the camber angle with movement of the upper arm to maintain optimal tire contact during cornering. Revised caster angle also delivers improved steering response.

 

 

The rear suspension uses a coil spring damper to cushion shocks from the road surface and improve driving stability. It can also be upgraded to an optional oil-filled shock absorber.

 

Flexibility of the T-bar rear suspension plate that holds the entire rear pod, including the motor and rear axle, produces excellent suspension effect. Optional parts are also available in FRP and carbon.

 

 

 

 

Includes Syncro KT-531P transmitter with a steering wheel that mimics the steering wheel of a real car and pistol-grip throttle (speed control). Adjust the neutral position of steering and throttle with trims, as well as steering angle with dual rate adjustment. It is also possible to operate in training mode with a reduced vehicle speed (training mode is the default setting).

 

 

Technical Data

■Length 177.0mm
■Width 76.0mm
■Height 44.0mm
■Chassis MR-04W-MM
■Wheelbase 98.0mm （2L）
■Tread F:64.5mm R:62.0mm
■Front Wheel Offset Narrow +1.5mm
■Rear Wheel Offset Wide +1.5mm
■Weight 167.6g
■R/C System Syncro KT-531P

Kit Content

<Readyset Contents>
●Factory assembled chassis
●Pre-painted body, complete with markings
●2.4GHz Perfex KT-531P 2.4GHz transmitter
●Front tread adjustment parts set
●Pinion gears 6T, 7T, 8T, 9T
●Spare nuts
●Wheel wrench
●Pinion gear tool
●Tires, wheels

Requirement to Run

<Required for Operation>
●AAA-size alkaline batteries x 4 for chassis.
●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for transmitter