RC BANNOK
KO PROPO BSx4S-one10 Grasper2 DRIFT SPEC No. 30218
KO PROPO BSx4S-one10 Grasper2 DRIFT SPEC No. 30218
受取状況を読み込めませんでした
KO PROPO
BSx4S-one10 Grasper2 DRIFT SPEC
No. 30218
[Specifications]
#Maximum Torque: 16.0Kg-cm Maximum Speed: 0.09sec/60deg(@7.4V)
#Maximum Torque: 12.1Kg-cm Maximum Speed: 0.11sec/60deg(@6.0V)
*1
#Dimensions: 40.5×26×21mm (Low Profile)
#Weight: 51.0g
#Servo Lead: 180mm
#Operating voltage: 6.0~7.4V (Lipo, Life, Ni-MH)
#Brush-less motor
#Hard alumite aluminum gear
#Dual ball bearings
#Hard servo gear shaft
#Aluminum top case
#Aluminum heat sink middle case
#Black cable
#Gold plated connector
#Serial Compatible
#HCS Compatible
#Recommend category
1/10 EP Drift car
*1 The preset of drift may not output the maximum torque and maximum speed because the optimum parameters are set for drift driving but can be changed with programming.
*This servo may be had servo's vibration by the installed car's structure and assembly. Also, the same vibration may occur during the period of use or situation of use.
Made in Japan.
ยินดีต้อนรับสู่ RC Bannok คุณสามารถค้นหา และซื้อสินค้าของเรา ได้ที่นี่ หากมีข้อสงสัย หรือคำถามสามารถสอบถามได้วัน จันทร์ ถึง วันเสาร์ สนทนากับเราเวลา 9.00 - 23.00 น.
Share
